Removing The Relay Control Board (Pwb-A) For The Duplex Unit (Optional); Removing The Transport Sensor - Minolta magicolor 2300 Series Service Manual

15-29. Removing the relay control board (PWB-A) for the duplex
unit (optional)
4131D045AA
4131D046AA

15-30. Removing the transport sensor

4131D047AA
1. Separate the duplex unit from the printer.
2. Remove the protective cover for the control board.
(2 screws)
3. Remove the relay control board for the duplex unit.
(1 screw and 3 connectors)
1. Separate the duplex unit from the printer.
2. Remove the protective cover for the control board
and the relay control board.
3. Remove the sensor mounting bracket and the
transport sensor. (1 connector)
102