Minolta magicolor 2300 Series Service Manual page 112

• The waste toner bottle is full.
WASTE TONER BOX FULL
• Toner cartridge "X" (specified color) is low.
X TONER LOW
• The OPC drum cartridge is low.
DRUM LOW
• Toner cartridge "XXXX" (specified color) is empty.
TONER EMPTY XXXX
DRUM CARTRIDGE
• The drum cartridge has reached the end of its service life.
END OF LIFE
WASTE TONER BOX
• The waste toner bottle is not installed.
NOT ATTACHED
DRUM CARTRIDGE
• The OPC drum cartridge is not installed.
NOT ATTACHED
• Toner cartridge "XXXX" (specified color) is not installed
XXXX NOT INSTALLED
• Tray2 was specified with the printer driver for printing, but
TRAY2
NOT ATTACHED
• Duplex printing was specified with the printer driver, but the
DUPLEX UNIT
NOT ATTACHED
• The printer has received more data than can be processed
ERROR
MEMORY OVERFLOW
• The amount of data to be printed exceeds the printer's
ERROR
VIDEO UNDERRUN
• An AIDC sensor error occurred.
ERROR AIDC SENSOR
• An error has been detected with the code ("X") indicated in
FATAL ERROR
CODE: XX
• A communication error occurred in the parallel, USB or
ERROR
COMMUNICATION
ERROR
• An RAM writing/reading error occurred.
RAM
ERROR
• A SDRAM DIMM error occurred.
DIMM
ERROR
• A ROM error occurred.
ROM
ERROR
• An internal controller error occurred.
CONTROLLER
properly.
Tray2 is not attached to the printer.
duplex unit is not attached to the printer.
by its internal memory.
internal data transmission speed.
the service message.
Ethernet interface.
112