Connecting The Cs40 Using Usb Communications; About The Phone - Intermec CS40 User Manual

Chapter 2 — Connecting and Configuring the CS40

Connecting the CS40 Using USB Communications

About the Phone

30
To use your computer in an Ethernet network
1 Connect your CS40 to the power and data y-cable.
2 Connect the power and data y-cable to the USB connector of the
USB Ethernet adapter cable. Ethernet communications is
automatically enabled on your CS40.
3 Make sure that your CS40 is communicating with the network.
You should see the network connection icon (
navigation bar.
You can use the power and data y-cable accessory to transmit data to
and receive data from a desktop PC through USB communications.
The USB port supports both USB client and USB host. The port
automatically senses the cable you are using and determines which
drivers to use. For more information about this accessory and how to
order it, see "CS40 Accessories" on page 3.
Your CS40 supports UMTS mobile wireless phone technology. With
the radio module installed in your CS40, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CS40 has a phone speaker, microphone, and speakerphone. It
also supports the use of a Bluetooth headset or hands-free kit. The
factory default setting for the phone is disabled.
After you turn on the phone and activate service with your wireless
carrier, you can customize the features of the phone and network
settings. For help, see the online help on your mobile computer.
) in the
CS40 Mobile Computer User's Manual