Ea11 Imager Reading Distances - Intermec CS40 User Manual

Appendix A — Specifications
CS40 Docking Connector Specifications

EA11 Imager Reading Distances

56
The CS40 has an array of seven pin surface contacts that provide USB
"On the Go" (OTG) connectivity and charge power while docked.
CS40 Docking Connector Specifications
Pin Number Signal Name
1 VEXT
2 ID
3 VBUS
4 D-
5 D+
6 GND
7 GND
Typical reading distances are done in an office environment using
office lights (4 lux). Minimum distances are measured in the dark
(0 lux). Both reading distances are provided in respective scan engine
integration guides. Contact your local Intermec representative for
more information.
Below are the typical and minimum standard reading distances for
the CS40 built with an EA11 imager. When correctly mounted, an exit
window reduces reading distances by about 4% for all scan engines.
Note: Minimum distances depend on the length of the bar code.
Description
Computer power
Identification pin
VBUS (5 V @ 100 mA max)
USB data signal
USB data signal
Ground (power return)
Ground (power return)
CS40 Mobile Computer User's Manual