How To Send Silent Update Packages To The Computer; Updating Individual Cs40S - Intermec CS40 User Manual

How to Send Silent Update Packages to the Computer

Updating Individual CS40s

CS40 Mobile Computer User's Manual
9 After the update is complete, your mobile computer cold boots
again. When a confirmation dialog box appears requesting user
input, dismiss it.
If you want to automatically download and send update packages to
your CS40, you can purchase a SmartSystems AutoDeploy License.
The silent updates do not require any user intervention and begin
when you choose to have the update process start. SmartSystems
Foundation users are notified when update packages are released so
that they can download them and update their Intermec computers.
For more information, see the SmartSystems Foundation Help.
You can download update packages from your PC to your CS40 using
Microsoft ActiveSync (Windows XP or earlier), Windows Mobile
Device Center (Windows Vista or Windows 7), or any other file
transfer method you choose.
To update an individual CS40
1 Download the Image Update packages you want to install from
the Intermec web site at www.intermec.com. Go to Support >
Downloads.
2 Transfer the Image Update packages from your PC to your CS40.
3 On your CS40, tap Start > File Explorer and navigate to the
location of the Image Update package.
4 Double-tap the package to install it. Your CS40 validates the
update package and prompts you to continue with installation.
5 Tap Install.
Your CS40 boots and enters a special Update Loader mode where
the computer has no connections and is completely unusable. This
process can take anywhere from 30 seconds to 15 minutes
depending on the update.
6 When the installation is complete, an Update Result page appears.
Tap Done.
Chapter 3 — Developing and Installing Applications
41