Adjusting The Volume - Intermec CS40 User Manual

Chapter 1 — Using the CS40

Adjusting the Volume

10
To type a character or access a function in orange on the overlay
1 Press b. The key status LED turns orange.
2 Press the key for the character or function.
The orange modifier key stays on until you press b again.
To type lowercase letters
1 Press c. The key status LED turns green.
2 Press the corresponding number key as many times as necessary
depending on the position of the letter you want to type.
For example, to type a lowercase letter z, press
To type uppercase letters
1 Press c 1 to turn on Caps Lock. The key status LED turns green.
2 Press the number key as many times as necessary depending on the
position of the letter you want to type.
Caps Lock stays on until you press c 1 again.
While Caps Lock is on:
you can type orange modifier characters by pressing b and the
•
key for that character.
you can type lowercase letters by pressing c and the
•
corresponding number key as many times as necessary
depending on the position of the letter you want to type.
For information on how to enter specific characters with keystrokes,
see Appendix C, "Keypads and Keystrokes."
You can adjust the computer volume for your needs and your
environment. The volume includes sounds you hear when you tap the
screen or read bar codes with the imager. You can set the volume to
off, very low, low, medium, high, very high (default), or vibrate.
c9999
CS40 Mobile Computer User's Manual
.