Chapter 4
4. 16. 2. Diagnostic
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
System Tools
•
Diagnostic Tool
•
Ping
- This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
•
Tracerouter
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address
is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this
case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS)
queries.
•
IP Address/Domain Name
192.168.0.1) or Domain name (such as www.tp-link.com).
•
Ping Count
- The number of Ping packets for a Ping connection.
•
Ping Packet Size
•
Ping Timeout
no reply in the specified time, the connection is overtime.
•
Traceroute Max TTL
3. Click
Start
to check the connectivity of the internet.
4. The
Diagnostic Results
the following figure, the connectivity of the internet is fine.
> Diagnostic.
- Select one diagnostic tool.
- This diagnostic tool tests the performance of a connection.
- Enter the destination IP address (such as
- The size of Ping packet.
- Set the waiting time for the reply of each Ping packet. If there is
- The max number of hops for a Traceroute connection.
page displays the diagnosis result. If the result is similar to
Configure the Router in Wireless Router Mode
64