Dhcp - TP-Link TL-WR841N User Manual

Chapter 4
• Allow Guest To Access My Local Network
local network and manage it.
• Guest Network Isolation
• Enable Guest Network Bandwidth Control
Bandwidth Control rules will take effect.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Control page.
4. 6.

DHCP

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
Configure the Router in Wireless Router Mode
- If enabled, guests can access the
- If enabled, guests are isolated from each other.
- If enabled, the Guest Network
Bandwidth
35