TP-Link TL-WR841N User Manual page 105

Chapter 5
• DoS Protection - Denial of Service protection. Select Enable or
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
function.
• ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable UDP-FLOOD Attack Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
• TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
• Forbit Ping Packet From WAN Port
ping packet from the internet cannot access the router.
• Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
Configure the Router in Hotspot Router Mode
System Tool > Statistics
- Tick the checkbox to enable or disable this
- The default value is 50. Enter a value
- Tick the checkbox to enable this function.
- The default value is 500. Enter a value
-Tick the checkbox to enable or disable this
- The default value is 50. Enter a value
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
Disable to enable or
is enabled.
99