TP-Link TL-WR841N User Manual page 15

Chapter 2
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method.
Note:
• WPS is not supported by iOS devices.
• The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function
will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is
configured with the appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device's screen. Here we take an Android phone as an
example.
2 ) Immediately press the WPS button on your router.
ON/OFF ON/OFF POWER POWER
3. Enter http://tplinkwifi.net
username and password, and then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to menu
> Internet Options > Connections
and click OK.
4. After successfully login, select
up the internet connection.
WPS/ WPS/ WIFI WIFI
WAN WAN 1 1 2 2 3 3 4 4 RESET RESET ON/OFF ON/OFF
in the address bar of a web browser. Use
> LAN Settings, in the screen that appears, untick the
Wireless Router
Connect to the Internet
WLAN
On
TP-Link
HomeNetwork
Office
TP-Link_123
TP-Link_ABC
Close to
MyHome
Test
Using Proxy
and follow the Quick Setup
admin for
Tools
checkbox,
to set
9