Wireless; Wireless Settings - TP-Link TL-WR841N User Manual

Chapter 4
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
4. 4.

Wireless

4. 4. 1.

Wireless Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Basic
3. Configure the basic settings for the wireless network and click Save.
• Wireless - Enable or disable wireless network.
• Wireless Network Name
must be assigned to all wireless devices in your network.
• Mode - You can choose the appropriate "Mixed" mode.
• Channel - This field determines which operating frequency will be used. The default
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Channel Width - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems
Restore Factory MAC
- This field displays the MAC address of the PC that is
WAN MAC Address
Settings.
- Enter a value of up to 32 characters. The same Name (SSID)
Configure the Router in Wireless Router Mode
to restore the MAC address of WAN
Clone MAC Address
field.
27