TP-Link TL-WR841N User Manual page 27

Chapter 4
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
• Authentication Type
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
• Service Name/Server Name
configured unless you are sure it is necessary for your ISP. In most cases, leaving
these fields blank will work.
• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
• Use IP Address Specified by ISP
addresses to the router, please select this item and enter the IP address provided by
your ISP in dotted-decimal notation.
• Echo Request Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Set DNS Server Manually
the router, please select this item and enter the IP address in dotted-decimal notation
of your ISP's primary DNS server. If a secondary DNS server address is available,
enter it as well.
L2TP
If your ISP provides L2TP connection, please select L2TP.
- Choose an authentication type.
- The service name and server name should not be
- If your ISP does not automatically assign IP
- The router will detect Access Concentrator online at every
- If your ISP does not automatically assign DNS addresses to
Configure the Router in Wireless Router Mode
Max Idle Time because some
21