TP-Link TL-WR841N User Manual page 81

Chapter 5
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
• PPP Username/Password
These fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• Connection Mode
• Always on - In this mode, the internet connection will be active all the time.
• Connect on demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect manually
immediately. This mode also supports the
on demand mode. The internet connection can be disconnected automatically
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
- You can click
Configure the Router in Hotspot Router Mode
or Static IP to activate the secondary
Connect/Disconnect
Max Idle Time
Max Idle Time
to connect/disconnect
function as Connect
75