Chapter 6
•
Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
•
WPA-PSK/WPA2-Personal
pre-shared passphrase.
•
Version
- Select Auto,
•
Encryption
- Select Auto,
•
Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
•
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
•
WPA /WPA2-Enterprise
•
Version
- Select Auto,
•
Encryption
- Select Auto,
•
Radius Server IP
•
Radius Server Port
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on
WPA-PSK
or WPA2-PSK.
TKIP
or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
WPA
or WPA2.
TKIP
or AES.
- Enter the IP address of the Radius server.
- Enter the port that Radius server used.
Configure the Router in Access Point Mode
131