Firmware Upgrade; Factory Defaults - TP-Link TL-WR841N User Manual

Chapter 6
• IP Address - The IP address of the target host where the Ping Watch Dog Utility
is sending ping packets.
• Interval - Time interval between two ping packets which are sent out
continuously.
• StartupDelay
is restarted.
• Fail Count - Upper limit of the ping packet this device can drop continuously.If
this value is overrun, this device will restart automatically.
6. 6. 5.

Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users a
better network experience. We will release the latest firmware at TP-Link official website
www.tp-link.com. You can download the lastest firmware file from the
our website and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to System Tools
4. Click Choose File
6. 6. 6.

Factory Defaults

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
default values.
- Time delay before first ping packet is sent out when this device
> Firmware Upgrade.
to locate the downloaded firmware file, and click Upgrade.
> Factory Defaults. Click
Configure the Router in Access Point Mode
Restore to reset all settings to the
Support page of
143