Wireless; Wireless Settings - TP-Link TL-WR841N User Manual

Chapter 5
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
5. 4.

Wireless

5. 4. 1.

Wireless Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Basic
3. Click Scan, select the client's network from the
4. Enter the selected network's wireless password in the
5. Configure the AP settings for the wireless network and click Save.
• Wireless Network Name
must be assigned to all wireless devices in your network.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is
Settings.
- Enter a value of up to 32 characters. The same Name (SSID)
Configure the Router in Hotspot Router Mode
to restore the MAC address of WAN
WAN MAC Address field.
AP List and click Conenct.
Password
Clone MAC Address
field.
81