TP-Link TL-WR841N User Manual page 36

Chapter 4
3. Configure the security settings of your wireless network and click Save.
• Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
pre-shared passphrase.
• Version - Select Auto,
• Encryption - Select Auto,
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
• WPA /WPA2-Enterprise
• Authentication Type
• Encryption - Select Auto,
• Radius Server IP
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on
WPA-PSK or WPA2-PSK.
TKIP or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
- Select Auto, WPA
TKIP or AES.
- Enter the IP address of the Radius server.
Configure the Router in Wireless Router Mode
or WPA2.
30