Clearing Patient Data - Zeiss Humphrey II-i series User Manual

8
The calculated trial lens data will automatically appear on the
Patient Data 1 screen, as is shown in the illustration to the left of this
step.
For Manual Trial Lens Entry:
1. From the Patient Data 1 screen, select TRIAL LENS.
2. Choose MANUAL TRIAL LENS INPUT.
3. Repeat Steps 3-6 in the preceding process.
4. Choose ENTRY COMPLETE. The manually entered trial lens data is automatically entered on
the Patient Data 1 screen.
Note: For guidelines on selecting the proper trial lens (for manual input), refer to
Lenses," on page 3-20 and "Examples of Trial Lens Correction," on page

Clearing Patient Data

Often you will want to enter information for a new patient on a blank Patient Data screen. To
remove all information on the Patient Data 1 and Patient Data 2 screens, use CLEAR PATIENT DATA.
1

From the Patient Data 1 screen, choose CLEAR PATIENT DATA.
2
Read the confirmation question and answer appropriately.
screen. It does not delete information from the database, if the patient
data was previously saved.
Humphrey Field Analyzer II- i series User Manual
Setting-Up Tests
Note: Clearing Patient Data only deletes information from the
3-13
"Using Trial
3-21.
2660021145640 A