Standard Parameters - Zeiss Humphrey II-i series User Manual

2
Select the parameter setting. The current setting is highlighted.
3
Repeat steps 1-2 for other parameters, then press SELECTION
COMPLETE.

Standard Parameters

One setting for each parameter has been designated by design as the default setting. It is
distinguished from the others by the appearance of an asterisk (*) on the parameter button. If you
wish to return all settings to their defaults at once, you can select RESET TO STANDARD.
Note: For the purpose of valid comparison, it is important to keep test parameters consistent among
different test visits for the same patient. This will maintain proper comparability when evaluating
test results from many visits. Other than test speed and fixation monitoring, you cannot change test
parameters once testing has begun.
Humphrey Field Analyzer II- i series User Manual
Test Parameters and Strategies
2660021145640 A
4-3