How To Print Gpa Reports; Default Gpa Report Options - Zeiss Humphrey II-i series User Manual

Field analyzer
Table of Contents

Advertisement

How To Print GPA Reports

Before you can print GPA reports, you must have a GPA license and it must be activated. See
to Activate GPA Software on the HFA II-i," on page 8-35
activate a GPA license. Once your GPA license is activated, the basic steps to print GPA reports are:
• Step 1: Select a valid Follow-up exam. See
page
8-30. The exam you select is the "Key Exam." Full Threshold, SITA Standard, and SITA Fast
exams can all be used as Follow-up exams depending on the Key Exam chosen.
• Step 2: Select reports from the Threshold Printout Selection Screen. See
from Threshold Printout Selection Screen," on page
or continue to Step 3.
• Step 3: Modify the GPA Exam Selection (Optional). Change the Baseline selection and
add/remove exams from Follow-up. See
on page
8-32. You may choose to print at the end of this step.
If a GPA report is not available (i.e., if there are not enough exams for the selected patient and eye),
you will be returned to the print menu to make another selection.

Default GPA Report Options

After your GPA software has been licensed, the GPA Summary will be printed by default. To change
which reports are selected by default whenever you enter the Threshold Printout Selection menu, do
the following:
1
From the Main Menu screen, select
SETUP>DEFAULT GPA PRINT OPTIONS.
2
On the Default GPA Print Options screen, select which report(s) you
would like to be selected by default by clicking in the button next to
the report so that an X is displayed in the button. For the first and last
buttons, select the report from the drop-down menus.
3
Press Done.
Your selection will be retained until you change it again.
Humphrey Field Analyzer II-
i
series User Manual
Guided Progression Analysis (GPA)
for instructions on how to acquire and
"Step 1: Select a Valid Follow-Up Exam," on
8-31. You may print the report at this time,
"Step 3: Modify the GPA Exam Selection (Optional),"
8-29
"How
"Step 2: Select Reports
SYSTEM SETUP
>PRINT
2660021145640 A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Humphrey II-i series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF