Deleting Custom Tests - Zeiss Humphrey II-i series User Manual

5
If YES, input up to 12 characters for the test name. The word
"Threshold" or "Screening" will appear after the test name on the
button.
You will not be able to change the name of the test after the ENTER
button is pressed. Therefore, be sure to check the name.
Press ENTER.
as part of the title on the printouts for your Custom test.
6
Custom test buttons are added automatically down the first column
of the Custom Tests screen. When five tests have been added, the next
test buttons will be added to the right-hand column. Screening tests
will always appear before threshold tests.
Menu screen. See
details.
At this point, we highly recommend that you perform a Configuration
Backup to back up your Custom test patterns to a USB storage device.
See
tions.

Deleting Custom Tests

1
Press the
Humphrey Field Analyzer II- i series User Manual
Note: The name of the Custom test button will also be printed
Note: Your Custom test buttons may be added to the Main
"Altering the Main Menu Screen," on page
"Configuration Back Up and Restore," on page
SYSTEM SETUP
icon from the Main Menu screen.
Custom Testing
12-13
2-26, for
11-5, for instruc-
2660021145640 A