Zeiss Humphrey II-i series User Manual page 58

2-18
Chapter (10), "File Functions,"
"Networking," for further details about networking on the HFA II-
General Operation
Note: Automatic saving at end of test to a floppy disk is no longer available. Use Copy Tests to save
tests to a floppy disk with an optional USB floppy disk drive.
has additional details on serial transfer of data between the various models of the HFA. Refer to
Humphrey Field Analyzer II-
2
Select the down arrow of the Save/Transmit Option drop-down box
to open the list shown in the illustration to the left of this step. Choose
one of the following options:
Save Only - Saves your completed exam to the hard drive at the end of
testing when you prompt to save. This will also save your completed
exam data to a USB storage device if the Save to USB option is on (it is
on by default), and a USB storage device is present or inserted into a
USB port at the time the test ends.
Save and Transmit - Saves your completed exam to the hard drive and
transmits the exam data at the end of a test to the "Transfer
Destination" you specify in Step 3. This will also save your completed
exam data to a USB storage device if the Save to USB option is on (it is
on by default), and a USB storage device is present or inserted into a
USB port at the time the test ends.
i
.
i series User Manual
Chapter (14),
2660021145640 A