Adjusting Contrast On Button Modules And Non-Color Deskphones - Avaya H.323 9608 Installation And Management Manual

Adjusting contrast on button modules and non-color
deskphones
About this task
Note:
When updating local or Craft procedures from a touch screen deskphone, touching the line
you want to change or the applicable softkey produces the same result as selecting a line
and pressing the applicable softkey on a non-touch screen IP deskphone.
bar
Use the following procedure to adjust the contrast of any button module when attached to any
9600 Series IP deskphone or any non-color IP deskphone. The 9611G, 9621G, and 9641G
each have a color display, and contrast adjustment is not applicable. Fifteen contrast levels
are available.
Procedure
1. When you select CONT from the Craft Local Procedure Screen, the deskphone
2. To change the setting, press the Right or Left navigation arrow to navigate through
3. If more than one button module is attached, scroll down to that line, for example, to
4. Press Save to store the new contrast settings and redisplay the Craft Local
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
prompts you to use the Right and Left navigation arrows to change the contrast for
button module shown as Module: 1 or the contrast for the deskphone shown as
Phone: contrast.
the settings.
By default, the contrast button is set to the middle of the contrast setting.
As you press the navigation arrow, the next higher or lower contrast level is selected
and displayed as the setting.
Module: 2 and repeat Step 2 to change the contrast.
Procedure screen.

Adjusting contrast on button modules and non-color deskphones

53