Disabling And Enabling Event Logging - Avaya H.323 9608 Installation And Management Manual

2. To change the Ethernet setting, press the Right navigation arrow to navigate
3. To change the PC Ethernet setting, select that line and press the Right navigation
4. Press Save to store the new settings and redisplay theCraft Procedures screen.

Disabling and enabling event logging

About this task
Note:
When updating local Craft procedures from a touch screen deskphone, touching the line
you want to change or the applicable softkey produces the same result as selecting a line
and pressing the applicable softkey on a non-touch screen IP deskphone.
Use the following procedure to enable or disable logging of system events.
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
• 100 Mbps full when PHY1STAT = 5
• 1000 Mbps full when PHY1STAT = 6
The PHY2STAT text strings are:
• Disabled when PHY2STAT = 0
• Auto when PHY2STAT = 1
• 10 Mbps half when PHY1STAT = 2
• 10 Mbps full when PHY1STAT = 3
• 100 Mbps half when PHY1STAT = 4
• 100 Mbps full when PHY1STAT = 5
• 1000 Mbps full when PHY1STAT = 6
through the possible settings.
Depending on the current value, the next sequential text string is selected and
displayed as the setting. For example, if the current value is 10 Mbps half (2) and
if you press the Right navigation arrow, the value changes to 10 Mbps full (3). If the
current value is 1000 Mbps full (6) and if you press the navigation arrow, the value
changes to Auto (1).
arrow to navigate through the possible settings.
Disabling and enabling event logging
57