Using The Preinstallation Checklist - Avaya H.323 9608 Installation And Management Manual

Using local Administrative Menu procedures
2. Select the line you want to change.
3. To change the setting, press the Right or Left navigation arrow to navigate through
4. Press Save to store the new setting and redisplay the Craft Procedures screen.

Using the preinstallation checklist

Before performing static programming of address information, verify that the call system meets
all the requirements listed in the Requirements to verify for your network section of the
the pre-installation checklist
In addition, you must have the values for the following parameters. To prevent data entry errors
that have a negative impact on your network, obtain and print copies of the following
parameters for each subnet:
• The IP Address of the call server.
• The IP Address of the gateway or the router.
• The IP netmask.
• The IP Address of the HTTP server.
46 Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
• Enabled mode if DOT1X = 0
• Enabled w/Logoff if DOT1X = 1
• Disabled if DOT1X = 2
Depending on which line you selected to change, the phone displays the following
text:
Current setting:
New Setting:
the applicable settings .
Depending on the current value, the deskphone selects the next sequential text
string displays it as the New setting. For example when you change the Pass-thru
mode, if the current value is Pass-thru mode, pressing the Choice Selector causes
the deskphone to display P-t w/Logoff. If the current setting is disabled, pressing
the Choice Selector changes the new setting to Pass-thru mode.
on page 14. You can skip item 4., as it refers to the DHCP server.
Comments? infodev@avaya.com
Creating