Adjusting Contrast On Sbm24 Button Modules And Non-Color Ip Telephones - Avaya one-X 9610 Installation And Maintenance Manual

Local Administrative Options
2. If you do not want to clear all values, press Cancel to terminate the procedure and retain
the current values. Press Clear to clear all values to their initial default values.
The telephone displays the following text:
Clearing values...
The telephone is cleared to its "out of the box" state, resetting the following values to their
factory defaults:
All system values and system initialization values.
●
802.1X identity and password.
●
User options, parameter settings, identifiers and password.
●
Any user data like Contact Lists or Call Logs are deleted.
●
After clearing the values, the telephone resets.
Adjusting Contrast on SBM24 Button Modules and
Non-Color IP Telephones
Note:
When updating local (Craft) procedures from a 9670G IP Telephone, touching the
Note:
line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on other 9600 Series
IPTelephones.
Use the following procedure to adjust the contrast of any SBM24 Button Module when attached
to any 9600 Series IP Telephone or any non-color IP Telephone. (The 9620C, 9640, 9650C, and
the 9670G each have a color display, and contrast adjustment is not applicable.) Fifteen
contrast levels are available.
1. When you select CONT from the Craft Local Procedure Screen, the telephone prompts you
to use the Right and Left navigation arrows to change the SBM24 (shown as Module: 1) or
the telephone (shown as Phone:) contrast.
2. To change the setting, press the Right (or Left) navigation arrow to cycle through the
settings. The factory default setting is the middle setting.
As you press the navigation arrow the next higher or lower contrast level is selected and
displayed as the setting.
3. If more than one SBM24 button module is attached, scroll down to that line, for example, to
Module: 2 and repeat Step 2 to change the contrast.
4. Press Save to store the new contrast setting(s) and redisplay the Craft Local Procedure
screen.
42 9600 Series IP Telephones Release 3.0 Installation and Maintenance Guide