Engine - Stihl MS 200 Service Manual

Hide thumbs Also See for MS 200:
Table of Contents

Advertisement

4.7

Engine

Always check and, if necessary,
repair the following parts before
looking for faults on the engine:
- Air filter
- Fuel system
- Carburetor
- Ignition system
Condition
Engine does not start easily, stalls
at idle speed, but operates normally
at full throttle
Engine does not deliver full power
or runs erratically
Engine overheating
MS 200, MS 200 T
Cause
Oil seals in crankcase damaged
Crankcase leaking or damaged
(cracks)
Piston rings worn or broken
Muffler / spark arresting screen
carbonized
Air filter dirty
Fuel hose severely kinked or
damaged
Insufficient cylinder cooling. Air
inlets in fan housing blocked or
cooling fins on cylinder very dirty
Remedy
Replace the oil seals
Seal or replace the crankcase
Fit new piston rings
Clean the muffler (inlet and
exhaust), replace spark arresting
screen, replace muffler if necessary
Replace air filter
Fit new hose or position it free from
kinks
Thoroughly clean all cooling air
openings and the cylinder fins
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms 200 t

Table of Contents