Clutch - Stihl MS 200 Service Manual

6.

Clutch

– Troubleshooting, b 4.1
– Remove the chain sprocket
cover, bar and chain, b 5
1
: Pull boot (1) off the spark plug.
1
: Unscrew the spark plug (1).
1
: Insert the locking strip (1)
0000 893 5903 – wide end first –
into the cylinder and then turn it
180°.
MS 200, MS 200 T
: Push the locking strip (1)
0000 893 5903 into the spark
plug hole until it butts against the
cylinder wall (arrow) as shown.
1
: Unscrew the clutch (1).
Note that the clutch has a left-hand
thread.
Disassembling
– Clamp the clutch in a vise.
: Use hook (2) 5910 890 2800 to
remove the clutch springs (1).
1
1
– Pull the clutch shoes off the
carrier.
: Pull the retainers (1) off the clutch
shoes.
– Clean all parts, b 16
– Replace any damaged parts.
2
1
1
: Slip the retainers (1) onto the
clutch shoes.
19