Cutting Attachment; Chain Catcher - Stihl MS 200 Service Manual

5.

Cutting Attachment

Wear gloves to protect your hands
from injury.
: Disengage the chain brake by
pulling the hand guard (1)
towards the front handle.
: Loosen the collar nut (arrow).
: Slacken the chain by turning the
screw counterclockwise.
1
: Unscrew the collar nut (arrow)
and remove the chain sprocket
cover (1).
18
1
: Push the guide bar (1) in the
direction of the clutch and take
the chain off the bar.
– Remove the guide bar (1).
– Remove the chain (2) from the
sprocket.
– Reassemble in the reverse
sequence.
: Fit the chain sprocket cover.
Make sure the peg (arrow)
engages the hole.
– For adjustment of chain tension
see MS 200, MS 200 T
instruction manual.
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 3.5
5.1
1
– Remove the chain sprocket
cover, bar and chain, b 5
2
1
: Take out the screws (arrows).
– Remove the chain catcher (1)
first and then the spiked bumper
(2).
– Reassemble in the reverse
sequence.
– Tightening torques, b 3.5
Chain Catcher / Spiked
Bumper
MS 200, MS 200 T
2