Sensitive Directional Power; Synchrocheck; Tracking Frequency; Frequency Rate Of Change - GE D60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 SENSITIVE
 DIRECTIONAL POWER
MESSAGE
The effective operating quantities of the sensitive directional power elements are displayed here. The display may be useful
to calibrate the feature by compensating the angular errors of the CTs and VTs with the use of the
settings.

PATH: ACTUAL VALUES METERING
 SYNCHROCHECK 1

MESSAGE
MESSAGE
The actual values menu for synchrocheck 2 is identical to that of synchrocheck 1. If a synchrocheck function setting is "Dis-
abled", the corresponding actual values menu item will not be displayed.

PATH: ACTUAL VALUES METERING
 TRACKING FREQUENCY

The tracking frequency is displayed here. The frequency is tracked based on the selection of the reference source with the
FREQUENCY AND PHASE REFERENCE
Power System section of chapter 5 for additional details.

PATH: ACTUAL VALUES METERING
 FREQUENCY RATE
 OF CHANGE
MESSAGE
MESSAGE
MESSAGE
The metered frequency rate of change for the frequency rate of change elements is shown here.
GE Multilin


SENSITIVE DIRECTIONAL POWER

DIRECTIONAL POWER 1
3: 0.000 W
DIRECTIONAL POWER 2
3: 0.000 W
 

SYNCHROCHECK

SYNCHROCHECK 1(2)
SYNCHROCHECK 1 DELTA
VOLT: 0.000 V
SYNCHROCHECK 1 DELTA
PHASE: 0.0°
SYNCHROCHECK 1 DELTA
FREQ: 0.00 Hz


TRACKING FREQUENCY

TRACKING FREQUENCY:
60.00 Hz
setting in the 
SETTINGS SYSTEM SETUP


FREQUENCY RATE OF CHANGE

FREQUENCY RATE OF
CHANGE 1: 0.00 Hz/s
FREQUENCY RATE OF
CHANGE 2: 0.00 Hz/s
FREQUENCY RATE OF
CHANGE 3: 0.00 Hz/s
FREQUENCY RATE OF
CHANGE 4: 0.00 Hz/s
D60 Line Distance Protection System
6.3 METERING
6.3.3 SENSITIVE DIRECTIONAL POWER
and
RCA
6.3.4 SYNCHROCHECK
6.3.5 TRACKING FREQUENCY
 menu. Refer to the
POWER SYSTEM
6.3.6 FREQUENCY RATE OF CHANGE
CALIBRATION
6
6-19