Load Encroachment; Phase Current; Neutral Current; Ground Current - GE F60 Instruction Manual

5 SETTINGS
5.5GROUPED ELEMENTS
Each protection element can be assigned up to six different sets of settings according to Setting Group designations 1 to 6.
The performance of these elements is defined by the active Setting Group at a given time. Multiple setting groups allow the
user to conveniently change protection settings for different operating situations (e.g. altered power system configuration,
season of the year). The active setting group can be preset or selected via the
ments section later in this chapter). See also the Introduction to Elements section at the beginning of this chapter.
PATH: SETTINGS GROUPED ELEMENTS
SETTING GROUP 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
Each of the six Setting Group menus is identical.
if no other group is active (see the Control Elements section for additional details).
GE Multilin
SETTING GROUP 1(6)

LOAD ENCROACHMENT

PHASE CURRENT

NEUTRAL CURRENT

GROUND CURRENT

NEGATIVE SEQUENCE
CURRENT

BREAKER FAILURE

VOLTAGE ELEMENTS

SENSITIVE
DIRECTIONAL POWER
(the default active group) automatically becomes active
SETTING GROUP 1
F60 Feeder Management Relay
5.5 GROUPED ELEMENTS

5.5.1 OVERVIEW

menu (see the Control Ele-
SETTING GROUPS
5.5.2 SETTING GROUP
See page 5–80.
See page 5–82.
See page 5–92.
See page 5–100.
See page 5–103.
See page 5–108.
See page 5–117.
See page 5–124.
5
5-79