Digital Counters; Selector Switches; Flex States - GE D60 Instruction Manual

6 ACTUAL VALUES
b) STATISTICS

PATH: ACTUAL VALUES STATUS
 REMOTE DEVICE
1

MESSAGE
Statistical data (two types) for up to 16 programmed remote devices is shown here.
The StNum number is obtained from the indicated remote device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated remote device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4 294 967 295 is incremented.

PATH: ACTUAL VALUES STATUS
 DIGITAL COUNTERS
 Counter 1
MESSAGE
MESSAGE
MESSAGE
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The

PATH: ACTUAL VALUES STATUS
 SELECTOR SWITCHES

MESSAGE
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

PATH: ACTUAL VALUES STATUS
 FLEX STATES

MESSAGE
MESSAGE
GE Multilin

REMOTE DEVICES STATISTICS
REMOTE DEVICE 1
StNum:
REMOTE DEVICE 1
SqNum:
 

DIGITAL COUNTERS

DIGITAL COUNTERS Counter 1(8)
Counter 1 ACCUM:
0
Counter 1 FROZEN:
0
Counter 1 FROZEN:
YYYY/MM/DD HH:MM:SS
Counter 1 MICROS:
0
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS


SELECTOR SWITCHES

SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
POSITION: 0/7


FLEX STATES

PARAM 1: Off
Off
PARAM 2: Off
Off

PARAM 256: Off
Off
D60 Line Distance Protection System

REMOTE DEVICE 1(16)
0
0
6.2.11 SELECTOR SWITCHES
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
Range: Off, On
Range: Off, On
6.2 STATUS
6.2.10 DIGITAL COUNTERS
6.2.12 FLEX STATES
6-7
6