5 SETTINGS
The DNP / IEC 60870-5-104 point lists always begin with point 0 and end at the first "Off" value. Since DNP / IEC
60870-5-104 point lists must be in one continuous block, any points assigned after the first "Off" point are ignored.
NOTE
Changes to the DNP / IEC 60870-5-104 point lists will not take effect until the D60 is restarted.
NOTE
h) IEC 61850 PROTOCOL
PATH: SETTINGS
PRODUCT SETUP
IEC 61850 PROTOCOL
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The D60 Line Distance Protection System is provided with optional IEC 61850 communications capability.
This feature is specified as a software option at the time of ordering. Refer to the Ordering section of chap-
ter 2 for additional details.
Use independent ports for IEC 61850 communication and take care when configuring the settings,
else loss of protection or misoperation of the relay can result.
The D60 supports the Manufacturing Message Specification (MMS) protocol as specified by IEC 61850. MMS is supported
over two protocol stacks: TCP/IP over ethernet and TP4/CLNP (OSI) over ethernet. The D60 operates as an IEC 61850
server. The Remote inputs and outputs section in this chapter describe the peer-to-peer GSSE/GOOSE message scheme.
The GSSE/GOOSE configuration main menu is divided into two areas: transmission and reception.
PATH: SETTINGS
PRODUCT SETUP
GSSE / GOOSE
CONFIGURATION
MESSAGE
GE Multilin
COMMUNICATIONS
IEC 61850 PROTOCOL
GSSE / GOOSE
CONFIGURATION
SERVER
CONFIGURATION
IEC 61850 LOGICAL
NODE NAME PREFIXES
MMXU DEADBANDS
GGIO1 STATUS
CONFIGURATION
GGIO2 CONTROL
CONFIGURATION
GGIO4 ANALOG
CONFIGURATION
GGIO5 UINTEGER
CONFIGURATION
REPORT CONTROL
CONFIGURATION
XCBR
CONFIGURATION
XSWI
CONFIGURATION
COMMUNICATIONS
IEC 61850 PROTOCOL
TRANSMISSION
RECEPTION
D60 Line Distance Protection System
5.2 PRODUCT SETUP
GSSE/GOOSE CONFIGURATION
5
5-29