Eaton EMR-5000 Installation, Operation And Maintenance Manual page 1056

Name
Sys.Ack RO
Sys.Ack Comm
Sys.Ack TripCmd
Sys.Ack LED-HMI
Sys.Ack RO-HMI
Sys.Ack Comm-HMI
Sys.Ack TripCmd-HMI
Sys.Ack LED-Comm
Sys.Ack RO-Comm
Sys.Ack Counter-Comm
Sys.Ack Comm-Comm
Sys.Ack TripCmd-Comm
Sys.Ack LED-I
Sys.Ack RO-I
Sys.Ack Comm-I
Sys.PS1-I
Sys.PS2-I
Sys.PS3-I
Sys.PS4-I
Sys.Maint Mode-I
Description
Signal: Acknowledgment of the Relay Outputs
Signal: Acknowledge Communication
Signal: Reset Trip Command
Signal: LEDs Acknowledgment :HMI
Signal: Acknowledgment of the Relay Outputs :HMI
Signal: Acknowledge Communication :HMI
Signal: Reset Trip Command :HMI
Signal: LEDs Acknowledgment :Communication
Signal: Acknowledgment of the Relay Outputs :Communication
Signal: Reset of all Counters :Communication
Signal: Acknowledge Communication :Communication
Signal: Reset Trip Command :Communication
Module Input State: LEDs Acknowledgment by Digital Input.
Module Input State: Acknowledgment of the Relay Outputs.
Module Input State: Acknowledge Communication via Digital Input. The replica that Communication has
received from the device is to be reset.
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Module Input State: Arc Flash Reduction Maintenance Switch
www.eaton.com
EMR-5000 IM02602012E
1056