RS485*
Master/Slave:
Connection:
Fiber Optic*
Master/Slave:
Connection:
URTD-Interface*
Connection:
*availability depends on device
Slave
6 screw-clamping terminals RM 3.5 mm (138 MIL)
(terminating resistors internal)
The RS485 interface is realized via terminals. The communication cable has to
be shielded. The shielding has to be fixed at the screw that is marked with the
ground symbol (rear side of the device).
Slave
ST-Plug
Versatile Link
EMR-5000
www.eaton.com
IM02602012E
935