Eaton EMR-5000 Installation, Operation And Maintenance Manual page 1023

Name
Remote Trip.Trip
Remote Trip.TripCmd
Remote Trip.ExBlo1-I
Remote Trip.ExBlo2-I
Remote Trip.ExBlo TripCmd-I
Remote Trip.Alarm-I
Remote Trip.Trip-I
URTD.WD1 Superv
URTD.WD2 Superv
URTD.WD3 Superv
URTD.WD4 Superv
URTD.WD5 Superv
URTD.WD6 Superv
URTD.MB1 Superv
URTD.MB2 Superv
URTD.LB1 Superv
URTD.LB2 Superv
URTD.Aux1 Superv
URTD.Aux2 Superv
URTD.Superv
URTD.active
URTD.Outs forced
RTD.Active
RTD.ExBlo
RTD.Blo TripCmd
RTD.ExBlo TripCmd
RTD.Alarm
RTD.Trip
RTD.TripCmd
RTD.WD 1 Trip
RTD.WD 1 Alarm
RTD.WD 1 Timeout Alarm
RTD.WD 1 Invalid
RTD.WD 2 Trip
RTD.WD 2 Alarm
RTD.WD 2 Timeout Alarm
Description
Signal: Trip
Signal: Trip Command
Module Input State: External Blocking1
Module Input State: External Blocking2
Module Input State: External Blocking of the Trip Command
Module Input State: Alarm
Module Input State: Trip
Signal: Supervision Channel WD1
Signal: Supervision Channel WD2
Signal: Supervision Channel WD3
Signal: Supervision Channel WD4
Signal: Supervision Channel WD5
Signal: Supervision Channel WD6
Signal: Supervision Channel MB1
Signal: Supervision Channel MB2
Signal: Supervision Channel LB1
Signal: Supervision Channel LB2
Signal: Supervision Channel Aux1
Signal: Supervision Channel Aux2
Signal: URTD Supervision Channel
Signal: URTD active
Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
Signal: Active
Signal: External Blocking
Signal: Trip Command blocked
Signal: External Blocking of the Trip Command
Alarm RTD Temperature Protection
Signal: Trip
Signal: Trip Command
Winding 1 Signal: Trip
Winding 1 Alarm RTD Temperature Protection
Winding 1 Timeout Alarm
Winding 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
Winding 2 Signal: Trip
Winding 2 Alarm RTD Temperature Protection
Winding 2 Timeout Alarm
www.eaton.com
EMR-5000 IM02602012E
1023