Importing A Certificate Via Usb - Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual

5.20

Importing a certificate via USB

The use of certificates increases the information security of web-based communication, e.g.
communication between a Sm@rtClient and the Sm@rtServer.
Requirement
● A Basic Panel with PROFINET interface and an HMI device image compatible with
WinCC (TIA Portal) V14 or higher.
● A USB memory device with a valid certificate is connected to the Basic Panel.
Procedure
1. Touch the "Internet Settings" icon.
2. Press the "Import Certificate"
button.
3. Select the desired certificate.
4. If the certificate is password-
protected, enter the password for
the certificate under "Password".
5. Press the "Import" button.
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
Configuring the device
5.20 Importing a certificate via USB
67