Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual page 34

Mounting and connecting
3.3 Connecting the HMI device
Connecting a controller to a Basic Panel with PROFINET interface
NOTICE
Data network security for communication via Ethernet
With Ethernet-based communication via PROFINET, the end user is responsible for the
security of the data network; proper functioning of the data network cannot be guaranteed
under all circumstances, for example, in case of targeted attacks that result in an overload
of the device.
You can connect Basic Panels with PROFINET
interface to the following SIMATIC controllers:
• SIMATIC S7-200
• SIMATIC S7-300/400
• SIMATIC S7-1200
• SIMATIC S7-1500
• WinAC
• SIMOTION
• LOGO!
You can connect Basic Panels with PROFINET
interface to the following controllers:
• Modicon Modbus TCP/IP
• Allen Bradley EtherNet/IP
• Mitsubishi MC TCP/IP
The connection is set up via PROFINET/LAN.
See also
Accessories (Page 15)
Connecting the equipotential bonding circuit (Page 28)
34
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB