Overview Of Functions - Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual

5.2

Overview of functions

The following table shows the functions available in the Start Center for configuring your HMI
device. Individual functions may be hidden, depending on the device type and device
configuration.
Icon
Available in connection with an HMI device image that is compatible with WinCC (TIA Portal) V14
1
or higher.
Available for devices with PROFINET interface
2
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
Function
Save to external storage medium – Backup (Page 50)
Restore from external storage medium – Restore (Page 51)
Load project from external storage medium (Page 52)
Update operating system from external storage medium (Page 53)
Changing the IP address and device name of a controller (Page 54)
Editing communication connections (Page 55)
Configuring the time server (Page 56)
Enter time and date (Page 57)
Activating the acoustic signal (Page 58)
Configuring Autostart or wait time (Page 59)
Changing the password settings (Page 60)
Displaying licensing information for the HMI device (Page 61)
Displaying information about the HMI device (Page 62)
Change network settings of PROFINET devices (Page 63)
Change network settings of PROFIBUS devices (Page 64)
Assigning transfer parameters (Page 65)
Configure Sm@rt Server (Page 66)
Importing a certificate via USB (Page 67)
Displaying and deleting certificates (Page 68)
Calibrating the touch screen (Page 69)
Changing the monitor settings (Page 70)
Setting the screen saver (Page 71)
Configuring the device
5.2 Overview of functions
1
1 2
1 2
1 2
49