Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual page 98

Technical specifications
8.1 Certificates and approvals
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
RCM Declaration of Conformity for Australia/New Zealand
This product meets the requirements of the standards:
● AS/NZS 61000.6.4
● IEC 61000-6-4
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Note that this device conforms to Limit Class A for emission of radio interference. This
device can be used in all areas except the residential area.
Identification for Eurasion Customs Union
● EAC (Eurasian Conformity)
● Customs union of Russia, Belarus and Kazakhstan
● Declaration of conformity according to Technical Regulations of the Customs Union
(TR CU)
Marine approvals
The following marine approvals are provided for the device. After acceptance, the certificates
will be made available under the following address on the Internet: Certificates for Basic
Panels 2nd Generation (https://support.industry.siemens.com/cs/ww/en/ps/14738/cert)
● ABS American Bureau of Shipping (USA)
● BV Bureau Veritas (France)
● DNV-GL Det Norske Veritas (Norway)-Germanischer Lloyd
● LR Lloyds Register
● NK Nippon Kaiji Kyokai (Japan)
98
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB