Electromagnetic Compatibility; Emitted Interference; Immunity To Interferences; Mechanical Ambient Conditions - Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual

8.2

Electromagnetic compatibility

The device is designed for industrial use.
8.2.1

Emitted interference

The device meets the requirements according to EN 61000-6-4. The device corresponds to
limit class A.
Note
The HMI device is not intended for use in residential areas. Operation of an HMI device in
residential areas can have a negative influence on radio/TV reception.
8.2.2

Immunity to interferences

The device meets the requirements according to EN 61000-6-2.
8.3

Mechanical ambient conditions

8.3.1

Transport and storage conditions

The following information is for a device that is transported and stored in its original
packaging.
The device meets the requirements according to IEC 60721-3-2, Class 2M2 with the
following amendments and limitations:
Type of condition
Free fall
Vibration to IEC 60068-2-6
Shock to IEC 60068-2-27
8.3.2

Operating Conditions

The following information applies to a device installed according to the specifications in these
operating instructions.
The HMI device is designed for stationary operation in a location protected from the effects
of the weather.
The device meets the requirements according to IEC 60721-3-3, Class 3M3 with the
following amendments and limitations:
Type of condition
Vibration according to IEC 60068-2-6
Shock according to IEC 60068-2-27
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
8.2 Electromagnetic compatibility
Permitted range
≤ 1 m
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
250 m/s , 6 ms, 1000 shocks
2
Permitted range
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 200 Hz, acceleration 1 g
150 m/s , 11 ms, 3 shocks
2
Technical specifications
99