Auto DNS via DHCP
Description
Value Range
Default Value
Configuration File Reference
DNS1
Description
Value Range
Default Value
Configuration File Reference
DNS2
Description
Value Range
Default Value
Configuration File Reference
4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
Note
•
When you change the settings on this screen and click [Save], after the message "Complete" has
been displayed, the unit will restart automatically with the new settings applied. If a unit is on a call
when "Complete" has been displayed, the unit will restart after the unit returns to idle.
Document Version: 2017-07
Selects whether to enable or disable the DNS server obtained by
DHCPv6.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Yes: Use DNS obtained by DHCPv6
•
No: Not use (use static DNS)
Yes
DHCP_DNS_ENABLE_IPV6
Specifies the IP address of primary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS1_ADDR_IPV6
Specifies the IP address of secondary DNS server for IPv6.
Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]
Not stored.
USER_DNS2_ADDR_IPV6
4.3.2 Ethernet Port Settings
Administrator Guide
71