4.7.3 Upgrade Firmware (For KX-HDV130/KX-HDV230)
Value Range
Default Value
Configuration File Reference
Firmware Version (For KX-HDV330/KX-HDV430)
Description
Value Range
Default Value
Configuration File Reference
4.7.3 Upgrade Firmware (For KX-HDV130/KX-HDV230)
This screen allows you to download the Upgrade Firmware data from the HTTP server.
You can upgrade the firmware manually, irrespective of the [Enable Firmware Update] setting.
Note
•
After the firmware has been successfully updated, the unit will restart automatically.
4.7.3.1 Upgrade Firmware
Firmware File URL (For KX-HDV130)
Description
Value Range
Default Value
160
Administrator Guide
Max. 384 characters
Note
•
If "{fwver}" is included in this parameter, it will be replaced with
the value specified in [Firmware Version]. For details about
the formats, see 2.1.3 Server Address Formats.
Not stored.
FIRM_FILE_PATH
Specifies the new firmware version of the unit.
6 characters
xx.xxx [x=0–9]
Not stored.
FIRM_VERSION
Specifies the URI where the firmware file is stored.
Max. 384 characters
Not stored.
Document Version: 2017-07