SIP_403_REG_SUB_RTX_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SIP_FORK_MODE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
AKA_AUTHENTICATION_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
RFC2543_HOLD_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
Document Version: 2017-07
BOOLEAN
Specifies whether or not to send a request when a 403 Forbidden
reply is received from the server in response to a REGISTER or
SUBSCRIBE.
•
Y: Send
•
N: Do not send
N
BOOLEAN
Specifies whether to use SIP Fork.
•
Y: Use SIP Fork
•
N: Not use SIP Fork
Y
BOOLEAN
Specifies whether to use AKA authentication.
•
Y: Use AKA authentication
•
N: Not use AKA authentication
N
BOOLEAN
Specifies whether to enable the RFC 2543 Call Hold feature on this
line.
•
Y: Enable RFC 2543 Call Hold
•
N: Disable RFC 2543 Call Hold
Note
•
If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•
If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Y
5.3.22 SIP Settings
Administrator Guide
285