4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
Note
•
When you change the settings on this screen and click [Save], after the message "Complete" has been
displayed, the unit will restart automatically with the new settings applied. If a unit is on a call when
"Complete" has been displayed, the unit will restart after the unit returns to idle.
4.3.2.1 Link Speed/Duplex Mode
LAN Port
Description
Value Range
Default Value
Configuration File Reference
Document Version 2017-07
Selects the connection mode (link speed and duplex mode) of the LAN
port.
•
Auto Negotiation
•
100Mbps/Full Duplex
•
100Mbps/Half Duplex
•
10Mbps/Full Duplex
•
10Mbps/Half Duplex
Auto Negotiation
PHY_MODE_LAN (Page 216)
4.3.2 Ethernet Port Settings
Administrator Guide
89