Basic Network Settings; Ip Addressing Mode; Ipv4 - Panasonic KX-HDV130 Manual

4.3.1 Basic Network Settings

This screen allows you to change basic network settings such as whether to use a DHCP server, and the IP
address of the unit.
Note
•
Changes to the settings on this screen are applied when the message "Complete" appears after
clicking [Save]. Because the IP address of the unit will probably be changed if you change these
settings, you will not be able to continue using the Web user interface. To continue configuring the unit
from the Web user interface, log in to the Web user interface again after confirming the newly
assigned IP address of the unit using the phone user interface. In addition, if the IP address of the PC
from which you try to access the Web user interface has been changed, close the Web port once by
selecting Off for Embedded Web on the unit (→ see Opening/Closing the Web Port in
1.1.6.3 Before Accessing the Web User Interface).

4.3.1.1 IP Addressing Mode

IP Addressing Mode
Description
Value Range
Default Value
Configuration File Reference

4.3.1.2 IPv4

Connection Mode
Description
Document Version: 2017-07
Selects the IP addressing mode.
•
IPv4
•
IPv6
•
IPv4&IPv6
IPv4
IP_ADDR_MODE
Selects the IP address setting mode for IPv4.
4.3.1 Basic Network Settings
Administrator Guide 67