Srtp Settings - Panasonic KX-HDV130 Manual

RTCP_SEND_BY_SDP_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
RTP_CLOSE_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
RTCPXR_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
Web User Interface Reference

5.3.27 SRTP Settings

SRTP_CONNECT_MODE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Document Version: 2017-07
INTEGER
Specifies whether to send RTCP signals by SDP (Session
Description Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP
attribute "a=rtcp:".
0
BOOLEAN
Specifies whether to enable processing to close held RTP sockets.
•
Y: Enable RTP Close
•
N: Disable RTP Close
N
BOOLEAN
Specifies whether to enable or disable RTCP-XR.
•
Y: Enable RTCP-XR
•
N: Disable
N
Enable RTCP-XR
INTEGER
Specifies the mode of SRTP feature.
5.3.27 SRTP Settings
Administrator Guide 299