Admin Password Settings - Panasonic KX-HDV130 Manual

4.4.3 Admin Password Settings

Value Range
Default Value
Configuration File Reference
Confirm New Password
Description
Value Range
Default Value
4.4.3 Admin Password Settings
This screen allows you to change the password used to authenticate the Administrator account when
logging in to the Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters,
which differ depending on the Web browser.
•
After you change the administrator password, the next time you access the Web user interface, the
authentication dialog box appears. Three consecutive login failures will result in an error
("401Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
102 Administrator Guide
6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Note
•
A hyphen (-) cannot be used as the first character.
Not stored.
Note
•
When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Initial
User Password Settings] screen is displayed automatically to
make the user set a password.
USER_PASS
Specifies the same password that you entered in [New Password]
for confirmation.
6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Not stored.
Document Version: 2017-07