Configuration File Specifications - Panasonic KX-HDV130 Manual

Priority
1
According to the table, settings configured later override previous settings (i.e., settings listed lower in the
table have a higher priority).
Notice
•
Make sure to perform Reset to Factory Default before connecting the unit to a different phone system.
Contact your phone system dealer/service provider for further information.

2.4 Configuration File Specifications

The specifications of the configuration files are as follows:
File Format
The configuration file is in plain text format.
Lines in Configuration Files
A configuration file consists of a sequence of lines, with the following conditions:
•
Each line must end with "<CR><LF>".
Note
<CR> or <LF> alone may be acceptable under certain conditions.
•
Lines that begin with "#" are considered comments.
•
Configuration files must start with a comment line containing the following designated character sequence
(44 bytes):
# Panasonic SIP Phone Standard Format File #
The hexadecimal notation of this sequence is:
23 20 50 61 6E 61 73 6F 6E 69 63 20 53 49 50 20
50 68 6F 6E 65 20 53 74 61 6E 64 61 72 64 20 46
6F 72 6D 61 74 20 46 69 6C 65 20 23
•
To prevent the designated character sequence being altered by chance, it is recommended that the
configuration file starts with the comment line shown below:
# Panasonic SIP Phone Standard Format File # DO NOT CHANGE THIS LINE!
•
Configuration files must end with an empty line.
•
Each parameter line is written in the form of XXX="yyy" (XXX: parameter name, yyy: parameter value).
The value must be enclosed by double quotation marks.
•
A parameter line written over multiple lines is not allowed. It will cause an error on the configuration file,
resulting in invalid provisioning.
Configuration Parameters
•
The unit supports multiple telephone lines. For some parameters, the value for each line must be
specified independently. A parameter name with the suffix "_1" is the parameter for line 1; "_2" for line 2,
and so on.
Examples of setting the line (phone number) for accessing a voice mail server:
Document Version: 2017-07
1-1 Provisioning with the standard configuration file
1-2 Provisioning with the product configuration file
1-3 Provisioning with the master configuration file
Settings configured from the Web user interface or the phone user interface
2.4 Configuration File Specifications
Setting Method
Administrator Guide 41