Heartland 16826 Assembly Manual page 48

PARTS REQUIRED:
x2
3/8 x 2 x 68-3/4" (0,9 x 5,1 x 174,6 cm)
x1
3/8 x 2 x 69-1/4" (0,9 x 5,1 x 175,8 cm)
x1
3/8 x 2 x 69-1/4" (0,9 x 5,1 x 175,8 cm)
¸
BEGIN
Place 68-3/4" back corner trim flush to bottom of back soffit board (Fig. A, B, F)
1
and flush with side panel along the length (Fig. A). Attach using (6) 2" finish nails
into corner wall framing (Fig. A, C). Space nails equally (Fig. C).
Place 69-1/4" back side corner trim angled end up (Fig. E) flush up under side soffit
2
panel and flush with back corner trim along the length (Fig. E). Attach trim using (6)
2" finish nails into corner wall stud (Fig. D, C). Space nails equally (Fig. C).
Fig. F
69-1/4"
Fig. C
(175,8 cm)
(Angled End up)
Repeat for other side.
3
FINISH
4 You have attached your back corner trim.
BACK CORNER TRIM
Flush at
soffit board.
2" x 68-3/4"
Corner Trim
Fig. E
68-3/4"
(174,6 cm)
Fig. B
68-3/4"
(174,6 cm)
Angled end Flush
69-1/4"
(175,8 cm)
46
x24
2" (5,1 cm)
Flush at top
Fig. A
BACK OF
SHED
at soffit.
Fig. D
2" Nail
Flush with back
corner trim.
2" Nail
Flush with
side wall
panel.
Seam is flush.
Caulk seam before
painting trim.